Negative Output Control (Noc) - Prestige APSRS Installation And Reference Manual

Vehicle keyless / remote start system
Hide thumbs Also See for APSRS:
Table of Contents

Advertisement

Detailed Descriptions: Setup Options
Negative Output Control
Negative Output Control (NOC) allows the installer to program any NOC output for any NOC option. For example, if
an installer is not using the GREEN/WHITE Dome Light output, but requires a second Remote Start Status Output, the
system can be programmed to change the output timing. Once programmed in the NOC Menu, the GREEN/WHITE wire
will operate with the same function as the LIGHT BLUE (Remote Start Status).
Note: This can only be programmed using the FlashLogic Weblink or Weblink Mobile.
Door Lock
This option supplies a pulse when the Lock function is activated from the remote control or system.
Door Unlock
This option supplies a pulse when the Unlock function is activated from the remote control or system.
2nd Door Unlock
This option supplies a pulse when the Unlock function is activated from the remote control or system (2) two times
within 10sec.
This requires Feature Bank 2, Feature 10 to be programmed ON.
Trunk Release
This option supplies a pulse when the trunk function is activated from the remote control or system
Remote Start Status
This output supplies an output for the entire remote start runtime programmed in Feature Bank 3. This output will
activate before the Ignition output and remain on for 4sec after shutdown.
Ignition
This option will supply an output for the entire remote start runtime programmed in Feature Bank 3. This output will
turn on after Remote Start Status and remains on during engine crank. This output will turn off with shutdown.
Accessory
This option will supply an output for the entire remote start runtime programmed in Feature Bank 3. This output will
turn on after Remote Start Status and will turn off during engine crank. This output will turn off with shutdown.
Factory Arm
This option supplies an output after remote start and with the lock function from the remote control or system.
Factory Disarm
This option supplies output before remote start and when the unlock function is activated from the remote control or
system.
16
(NOC)
Lock
Pulse After Shutdown
Unlock
Domelight
2nd Unlock
Headlight
Trunk
Defrost
Remote Start Status
LED
Ignition
Ch. 4 AUX
Accessory
Ch. 5 AUX
Factory Arm
Ch. 6 AUX
Factory Disarm
Ch. 7 AUX
Pulse During Crank
APSRS_RevC_9/19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents