Safety Advice; Safety Rules And Regulations - SaMASZ KDF 390 Operator's Manual

PTO shafts of other brands with equivalent parameters could be used after SaMASZ
permission.
CAUTION:
Optional extra equipment should be ordered separately.

4. SAFETY ADVICE

4.1. Safety rules and regulations

Operation without safety guards as well as with the damaged or raised guards is not allowed
(danger of the stones, etc. being thrown out).
Start mowing only when the tractor's PTO reaches its normal 1000 rpm.
DO NOT exceed 1050 PTO rpm.
Nobody is allowed to remain within the danger area of at least 50 m. Particular caution is
necessary when operating near roads and in stoney areas.
Any maintenance and adjustment work should only be done after the drive has been
disconnected and when the cutting discs have come to a complete standstill.
Always check mower before starting work, in particular for damaged, missing and/or worn
knives and knife holders. Damaged or worn parts must be replaced.
When driving on public roads always comply with local traffic regulations, especially
concerning warning lights.
No person nor object is allowed to be present on the mower or self-propelled machine
FORTSCHRITT when transported or operating.
CAUTION:
All
the FORTSCHRITT's engine has been stopped, all rotating parts have come
to the complete standstill and the cutterbar is on the ground.
CAUTION:
Be certain that children and animals are at a safe distance away from the
machine. Never allow anyone to ride on a machine or self-propelled mower
FORTSCHRITT.
The bolts and other fasteners have to be periodically checked and, if necessary, tightened or
replaced. DO NOT work with damaged or worn fasteners.
During operation of the mower the Regulation of the Farm Ministry and Food Economy) from
12-01-1998 dealing with safety and hygiene during the operation of tractors, machinery, tools
andequipment used for farming (Dz. U. Nr 12/98 poz. 51), should be observed,
Operator's manual
service and repair
Front disc mower
operations must
- 6 -
KDF 390
be done only after