Safety Advice; Safety Rules And Regulations - SaMASZ KWT 550 Operator's Manual

Tab. 4. Recommended PTO shaft for mounting the machine to a tractor
Arm type Power
HP
KWT 550/650
CAMEL 35
KOLIBER
Shaft end without clutch –
Connect from tractor's side
CAUTION:
PTO shaft lubrication frequency must be respected. Points shown on Fig. 16
shall be lubricated every 8 hours.
PTO shaft shall also be lubricated prior to and after period of longer idleness.
PTO shafts of other brands with equivalent technical parameters may be used on the SaMASZ
permission.
CAUTION:
Optional extra equipment should be ordered separately.
4.

SAFETY ADVICE

4.1.

Safety rules and regulations

Front axis of the tractor should be well weighted to keep the balance. If need be, use front wheel
weights.
Any operation with the hydraulic lift lever should be conducted from the operator's seat; DO NOT
move the lever from outside of the tractor.
In case of tractors equipped with EHR, controlling with hydraulic lift is conducted with a button
located outside the tractor's cabin. When operating, please be extremely careful.
Use PTO shaft with CE marking.
Operating without safety guards is not permitted. Neither operation with damaged or raised guard
is permitted (danger of stones, etc. being thrown out).
Start mowing only when the tractor PTO reaches its nominal 1000 rpm value.
DO NOT exceed 1050 PTO rpm.
No unauthorized personnel is allowed to remain within the danger area of at least 25 m. Keep
particular caution when operating near roads and in stony areas.
Operator's manual
Length Moment
mm Nm
460
660-900 7G3N066CE007007MA
8h
Fig. 16. PTO shaft lubrication. Mounting directions
Arm: KWT 550/650, CAMEL 900, KOLIBER 400
Flail head: KW 110, KW 125, KW 140, Lama 120
Symbol Clutch
8h
8h
- 12 -
Manufacturer Remarks
Bondioli &
Pavesi
Shaft end without clutch –
Connect from mower's side