Boom; Suspension Effect Adjustment - Hardi COMMANDER Classic PRO Instruction Book

4 - Sprayer setup

Boom

Suspension effect adjustment

In order to alter the behaviour of the boom the trapeze has 4 set-
tings.
Setting 1: For use on uneven ground with many obstacles.
Setting 2: All-round standard setting (Factory setting)
Setting 3: Slightly slower mowing trapeze. Good at following slopes,
but less compensating for obstacles.
Setting 4: Very slow moving trapeze. For use on even ground and
slopes where there are no obstacles.
How to alter the setting
1. Unfold and support the boom.
2. Loosen bolt from locking hole (A).
3. Remove pin + mounting (B).
4. Place (B) in new setting position (1-4).
5. Fasten bolt in locking hole (A) again.
4.13