Diagram - Smart Valve System; Pump; Valves And Symbols - Hardi COMMANDER Classic PRO Instruction Book

Diagram - Smart Valve system

1. Suction filter
2. Suction manifold

3. Pump

4. Pressure manifold
5. Agitation/Rinsing valve
6. Agitation tube
7. Safety valve
8. HARDI-MATIC
9. Self-cleaning filter return
10. Self-cleaning filter
11. Check valve
Pump
A diaphragm pump with 6 diaphragms, model 363 or 463, with easily accessible valves and diaphragms. Standard = 540
r.p.m. (6 splines). Optional = 1000 r.p.m. (21 splines).

Valves and symbols

The valves at the MANIFOLD are distinguished by coloured identification on the function labels. Symbols corresponding
to every possible function of use are located on the discs for easy identification and operation. A function is activated by
turning the handle towards the desired function.
ATTENTION! Only the functions in use should be open - always close remaining valves.
ATTENTION! If a MANIFOLD valve is too tight to operate - or to loose (= liquid leakage) - the valve needs to be ser-
viced. Please see the section 'Maintenance' for further information.
12. Boom section valves
13. Boom
14. Boom pressure gauge
15. Flush tank
16. HARDI chemical inductor
17. Tank rinse nozzles
18. Pressure equalization return
19. Boom Tube Pressure relief
20. Options
21. Ball valve
3 - Description
3.5