Table of Contents
Advertisement
6 - Maintenance
Scheduled maintenance
Every 10 working hours – Suction filter
To service the suction filter, proceed as follows:
1. Unscrew the nut and open the filter.
2. Remove the filter from its housing.
3. Replace the o-rings if necessary.
To reassemble it:
4. Grease the o-rings.
5. Fit the filter in its housing.
6. Grease the o-ring of the filter lid.
7. Refit the lid and screw it on fully.
Every 10 working hours – Pressure filters
To remove the pressure filter, unscrew the filter housing to inspect and
clean the filter. When you reassemble the filter, grease the o-ring.
There are different mesh widths. See the section 'Technical
specifications – Filters and nozzles' .
60
Advertisement
Table of Contents
