Table of Contents
Advertisement
5 - Operation
How to fold the boom - VHZ
A. Activate hydraulic control lever.
B. Set slanting position at midway.
C. Lock trapeze on switch (2).
D. Raise boom half-way to the top (minimum).
E. Push switches (6) and (7) inwards to fold outer sections.
F. Push switches (4) and (5) inwards to fold intermediate sections.
G. Lower the boom completely.
Single-sided folding
1. Activate hydraulic control lever.
2. Raise boom half-way to the top (minimum).
3. Unfold either right or left intermediate section.
4. Unfold either right or left outer section.
5. Lower boom to desired working height.
ATTENTION! Do not unlock trapeze!
Alternative boom widths - '16-12' kit (optional equipment)
To disable folding of outer sections this kit is fitted to the outer cylin-
ders of the boom wings.
Picture shows '16-12' kit mounted to boom wing with tap for
ON/OFF position.
5.3
Advertisement
Table of Contents
