Table of Contents
Advertisement
Operate
6.2 Parameter description
"2.4.3.6 Ti Down"
Conditions:
Setting range:
Purpose:
6.2.2.5
"2.5 Display"
Use the following menus to adjust contrast and orientation of the display to your
requirements.
"2.5.1 Contrast"
Requirements:
Factory setting:
Setting range:
Purpose:
Description:
"2.5.2 Orientation"
Factory setting:
Setting options:
Purpose:
Description:
90
Positioner is initialized.
0.001 ... 100.000
Integration time constant in closing direction. A value change will
become effective immediately. Canceling is not possible.
None
3
0 ... 6
To adjust the legibility of the display.
Use this menu to set the contrast of the display.
If operating at temperatures below -20 °C the positioner's liquid crystal
display becomes sluggish and the display repeat rate is reduced
considerably.
Standard
Standard
Upside down
Adjusting the display to the mounting position.
If you select the setting "Upside down", the display rotates the
displayed values by 180°. The function of the buttons is also
rotated.
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03
Advertisement
Table of Contents
