Required Tools - Siemens SITRANS VP300 Operating Instructions Manual

Installing/mounting

4.2 Required tools

4.2 Required tools
You will need the following tools to mount and connect the positioner:
①
②
③
④
⑤
⑥
⑦
⑧
⑨
30
Phillips screwdriver PZ2 (Pozidriv size 2) - for housing and grounding terminals
Flat-headed screwdriver 0.6 x 3.5 - for connection terminals
Torx screwdriver TX10 - for PCB covers and cable anchors
Torx screwdriver TX20 - for settings on the pneumatic block
Allen key 3 - for magnet clamp linear actuator
Allen key 5 - for device fastening
Wrench SW15 - for sound absorber
Wrench SW19 - for magnet clamp part-turn actuator
Wrenches SW22 and SW24 - for cable glands
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03