Siemens SITRANS VP300 Operating Instructions Manual page 72

Operate
6.2 Parameter description
See also
"3.3 Initialization values" (Page 92)
"1.4.2 Factory setting"
Factory setting:
Purpose:
"1.4.3 Stroke calibration"
Factory setting:
Purpose:
Description:
70
Cancel
Reset all adjustable parameters to factory setting. The positioner is
thus in the condition it is in on delivery, i.e. the positioner is not
initialized.
Exception: Settings in "5 Security" main menu (Page 126) and in "6
Language" main menu (Page 127) are not reset to factory setting.
Cancel
To re-calibrate the stroke.
The previously used values for the upper and lower end positions are
cleared. The positioner then re-determines the end positions and the
actuating time by moving the actuator.
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03