Table of Contents
Advertisement
Operate
6.2 Parameter description
"3.6.5.1 Activation"
Factory setting:
Setting options:
Purpose:
Description:
"3.6.5.2 Basic limit"
Requirements:
Factory setting:
Setting range:
Purpose:
"3.6.5.3 Factor 1" to "3.6.5.5 Factor 3"
Conditions:
Factory setting:
Setting range:
"3.6.6 Number of direction changes"
This menu is used to make settings regarding the monitoring of changes in direction. With
this parameter activated, the number of changes in directionof the final control element
beyond the deadband is continuously monitored.
The current value is displayed in "3.4.2 Number of direction changes" (Page 92). If one of
the three parameterizable thresholds exceeds this value during the test, a maintenance
message is output by the device.
112
Off
Off
On
Monitoring the total distance travelled by the final control element.
Use this parameter to activate the test for monitoring violation of the
stroke counter.
Activation of the monitoring function
"3.6.5.1 Activation" (Page 112)
1000000
1 ... 100000000
The basic limit defines how many strokes the positioner may undergo
by default.
Monitoring function is activated.
"3.6.5.1 Activation" (Page 112)
With "3.6.5.3 Factor 1": 1
With "3.6.5.4 Factor 2": 2
With "3.6.5.5 Factor 3": 5
0.1 ... 40.0
Identical setting range for each factor
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03
Advertisement
Table of Contents
