Table of Contents
Advertisement
Introduction
1.4 Checking the consignment
1.4
Checking the consignment
1. Check the packaging and the device for visible damage caused by inappropriate handling
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing the shipping documents with your order for
See also
Return procedure (Page 153)
1.5
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
Special conditions for storage and transportation of the device are listed in Chapter
"Technical data (Page 155)".
8
during shipping.
correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion.
Do not use any damaged or incomplete devices.
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
Provide additional packaging as necessary.
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03
Advertisement
Table of Contents
