Connecting To Voltage Supply; Preparing The Connection - Vega VEGASWING 51 Operating Instructions Manual

Connecting to voltage supply

Note safety instructions
Selecting connection cable
Cable glands
16
5 Connecting to voltage supply

5.1 Preparing the connection

Generally note the following safety instructions:
Connect only in the complete absence of line voltage
l
VEGASWING 51 is connected with standard cable with round
cross section. Depending on the plug connection, you have to
select the outer diameter of the cable respectively so that the
seal effect of the cable gland is ensured.
Valve plug DIN 43650, ø 4.5 ... 7 mm
l
Valve plug DIN 43650 with IDC method of termination,
l
ø 5.5 ... 8 mm
Use cable with a round wire cross section and tighten the
cable gland.
When mounting outdoors, on cooled vessels or in humid
areas, in which cleaning is carried out e.g. with steam or high
pressure, it is particularly important to seal the cable gland.
VEGASWING 51 - - contactless electronic switch