Kessel Aqualift F Basic Installation And Operating Manual page 66

5.3 Pipe connections
Connect inlet/ventilation pipe
Determine position for pipe connections.
Select drill with appropriate hole saw (Art. no. 500101).
Carry out drilling in accordance with the hole saw instruc-
tions.
Insert appropriate pipe seals.
Grease inlet/ventilation pipe and slide through the pipe
seals.
Establish pressure connection
Clean bonding surfaces beforehand.
Apply PVC adhesive to the pressure connection
socket.
Slide on adhesive sleeve.
Apply PVC adhesive to the pressure pipe and slide into
the adhesive sleeve.
Observe the usage instructions and drying time for the
adhesive!
66 / 144 Pumping station / Installation and operating manual
1
2
1
2
3
016-102_01 DE_EN_FR
3
4