Kessel Aqualift F Basic Installation And Operating Manual page 86

Activate manual operation
Press button (9) / (10), the manual operation LED (4) / (5)
flashes orange.
The wastewater pump can be switched on as follows when
manual operation is activated:
Switching on briefly
Press button (9) / (10) 1x.
✓ The wastewater pump will be switched on for a short
period.
Switching on for longer
Press and hold button (9) / (10) for as long as the waste-
water pump should be switched on.
The wastewater pump will switch on.
If manual operation is not used for a certain period of time
(5 minutes), the control unit re-activates the automatic
operation.
86 / 144 Pumping station / Installation and operating manual 016-102_01 DE_EN_FR