IBM Aptiva Hardware Handbook page 93

The following table can help you when installing adapter cards.
Table 10: Adapter card configurations
Adapter card or cards
currently installed:
None
Plug and Play
Non–Plug and Play
Both Plug and Play and
Non–Plug and Play
Adapter card you
Action:
are installing:
Plug and Play Do not change any settings.
Non–Plug and Play Do not change any settings.
Plug and Play Do not change any settings.
Non–Plug and Play Change settings in the Plug and Play Setup Utility before installing the card. For
instructions on changing the Plug and Play Setup Utility, see the Aptiva Index.
Plug and Play Change settings in the Plug and Play Setup Utility before installing the card. For
instructions on changing the Plug and Play Setup Utility, see the Aptiva Index.
Non–Plug and Play Do not change any settings.
Plug and Play Do not change any settings.
Non–Plug and Play Change settings in the Plug and Play Setup Utility before installing the card. For
instructions on changing the Plug and Play Setup Utility, see the Aptiva Index.
Preparing to install adapter cards 83