Removing Memory Modules - IBM Aptiva Hardware Handbook

Removing memory modules

To remove a memory module from its socket:
1.
Locate the two clamps that hold the memory
module in place. One clamp holds the left edge of
the module and the other clamp holds the right
edge.
2.
At the same time, push both clamps outward
(away from the edges of the module). The module
will release and move forward.
Clamp
104 Installing and removing memory modules
Memory Module
Socket
3.
Lift the module out of the socket.
Memory Module
Memory Module
Socket
Remember to reinstall all hardware you removed to
note:
access the memory module sockets.
72-pin