Installing And Removing Memory Modules; Installing Memory Modules - IBM Aptiva Hardware Handbook

Installing and removing memory modules

Before beginning these steps, you may have to remove
installed adapter cards and the drive and bracket
installed in bay 1. For instructions on removing adapter
cards, see page 86. For instructions on removing the
drive and bracket in bay 1, see page 94.
Your computer will come with at least one memory
module already installed.

Installing memory modules

To install an additional memory module in an empty
socket:
1.
Find the notched edge of the module, and position
it as shown.
2.
Insert the module straight down into the socket
until the connectors line up and the module is
firmly in place. (Steps continued on the next page.)
Notch
Installing and removing memory modules
72-pin
Memory Module
Socket 3
Socket 2
Socket 1
111