Installing And Removing A Hard Disk In Bay 6 - IBM Aptiva Hardware Handbook

Installing and removing a hard disk in bay 6

Bay 6 can hold a 3.5-inch slim hard disk. For hard disk removal, reverse these steps.
1.
Insert the drive into the bay. Align the screw holes
and insert the four screws.
Hard Disk
(Front View)
2.
Connect the power and signal cables. (To ensure
that your hard drive functions properly, read
"Installing additional drives" on page 116 before
connecting the cables.)
Installing and removing a hard disk in bay 6
Hard Disk
Signal Cable
Power Cable
123