Changing Jumper Settings On The Mwave Card - IBM Aptiva Hardware Handbook

3.
Click on the down arrow in the "I/O Addr" box of
the "Mwave system" item.
If you accidentally click on the wrong box, press
note: Esc. The box will close and you can try your
selection again.
4.
Double-click on the address that you want your
adapter card to use.
5.
Click on Update. A "Help" window appears. When
you have read the contents, click on OK. A "Con-
firm" window appears. When you have read the
contents, click on Yes.
6.
An "Information" window will be displayed. When
you have read the contents, click on OK.
7.
Click on Exit to exit the Mwave Hardware Configu-
ration utility. You must re-boot your computer for
these changes to take effect.
8.
If you are using OS/2 Warp, close all open pro-
grams. Click on the Shut down button, then click
on OK.
When you see the message to press Ctrl, Alt, and
Delete, turn the computer off.
If you are using Microsoft Windows, close all open
programs. From the "File" menu on the Program
Manager screen, click on "Exit Windows". Click on
OK.
At the "Aptiva Menu" turn the computer off.
Changing jumper settings on the
Mwave card
You must change the jumpers on the adapter card to
match the software settings. The jumpers you should
change are labeled P4 and P5 on the adapter card. To
change the jumpers:
1.
Locate the jumpers.
About Mwave cards 23