Figure 22: Sample Of Fserver.xif File Generated - SMC Sierra Monitor FieldServer ProtoNode FPC-N38 Startup Manual


For Windows XP and Windows 7, use the following IP Address:

Click twice.

Open a web browser and go to the following address: [IP Address of ProtoNode]/fserver.xif.
o
Example: 192.168.1.24/fserver.xif

If the web browser prompts to save the file, save the file onto the local PC. If the web browser
displays the xif file as a web page, save the file onto the local PC as "fserver.xif".

Figure 22: Sample of Fserver.XIF File Generated

Page 25 of 43
Riello ProtoNode Start-up Guide