Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SMC Sierra Monitor FieldServer FS-8700-122 PROFIBUS DP Master
Summary of Contents for SMC Sierra Monitor FieldServer FS-8700-122 PROFIBUS DP Master
- Page 1 FieldServer FS-8700-122 PROFIBUS DP Master Driver Manual (Supplement to the FieldServer Instruction Manual) APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after May 2019. Driver Revision: 1.01 Document Revision: 1.A...
-
Page 2: Technical Support
PROFIBUS DP Master Driver Manual Technical Support Please call us for any technical support needs related to the FieldServer product. Sierra Monitor Corporation 1991 Tarob Court Milpitas, CA 95035 Website: www.sierramonitor.com U.S. Support Information: +1 408 964-4443 +1 800 727-4377 Email: support@sierramonitor.com EMEA Support Information:... -
Page 3: Table Of Contents
PROFIBUS DP Master Driver Manual TABLE OF CONTENTS PROFIBUS DP Master Description ..................... 4 Driver Scope of Supply ........................4 Supplied by Sierra Monitor ......................4 Provided by the Supplier of 3 Party Equipment................4 2.2.1 Required 3 Party Software ....................4 2.2.2 Required 3 Party Configuration ..................... -
Page 4: Profibus Dp Master Description
PROFIBUS DP Master Driver Manual PROFIBUS DP MASTER DESCRIPTION The FieldServer PROFIBUS DP Master driver can be used to transfer I/O data with up to 125 PROFIBUS DP Slave devices. The FieldServer is programmed with an embedded database using the required 3 party configuration tool. -
Page 5: Hardware Connections
PROFIBUS DP Master Driver Manual HARDWARE CONNECTIONS The FieldServer is connected to the PROFIBUS network and NetTool as shown in the connection drawing below. PROFIBUS DB9 connector NetTool RS-232 connector PROFIBUS Status LEDs HMS Anybus NetTool RS-232 Serial Cable PROFIBUS DB9 Connector Pinouts * Name Description Housing... -
Page 6: Configuring The Fieldserver As A Profibus Dp Master Client
PROFIBUS DP Master Driver Manual CONFIGURING THE FIELDSERVER AS A PROFIBUS DP MASTER CLIENT For detailed information on FieldServer configuration, refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (see “.csv”... -
Page 7: Client Side Connection Descriptors
PROFIBUS DP Master Driver Manual Client Side Connection Descriptors Section Title Connections Column Title Function Legal Values Adapter Adapter Name Prof_DP Example Client Side Connections Adapters Adapter Prof_DP Client Side Node Descriptors Section Title Nodes Column Title Function Legal Values Up to 32 alphanumeric Node_Name Provide name for Node. -
Page 8: Client Side Map Descriptors
PROFIBUS DP Master Driver Manual Client Side Map Descriptors 4.5.1 FieldServer Related Map Descriptor Parameters Column Title Function Legal Values Map_Descriptor_Name Name of this Map Descriptor. Up to 32 alphanumeric characters Name of Data Array where data is One of the Data Array names from Data_Array_Name “Data Array”... -
Page 9: Map Descriptor Examples
PROFIBUS DP Master Driver Manual Map Descriptor Examples This example shows the transfer of I/O data with Remote PROFIBUS DP Slaves using Station Addresses of 1 and 125. Map Descriptor Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name Word_In_003 , Word_Input , Rdbc , PDP_SLV003... -
Page 10: Configuring The Embedded Profibus Database
PROFIBUS DP Master Driver Manual Configuring the Embedded PROFIBUS Database The PROFIBUS Master has to be configured with an embedded database that contains information about the PROFIBUS Network data rate and remote Slave devices to access. The HMS Anybus NetTool for PROFIBUS software must be installed and used for this purpose. - Page 11 PROFIBUS DP Master Driver Manual Right-click on the PROFIBUS Slave and assign its PROFIBUS address. Continue adding all other Slaves and setting their PROFIBUS addresses. Right click on the ABM-DPV Master device and select Object Properties. Set the Master Station Address to the same as the System_Station_Address used in the FieldServer’s config.csv file.
- Page 12 PROFIBUS DP Master Driver Manual Select the first slave device, right-click on the Slot 1 line and choose Module selection. Now add I/O modules up to the total number of bytes or words that will be transferred with this Slave as set up in the config.csv file.
- Page 13 PROFIBUS DP Master Driver Manual Choose Online-> Download configuration to install the embedded database in the FS-B35. NOTE: The FS-B35 must be running with a valid configuration file before it will allow download of a new database. Page 13 of 14...
-
Page 14: Appendix A. Troubleshooting
PROFIBUS DP Master Driver Manual Appendix A. Troubleshooting Appendix A.1. Connection Tips & Hints Appendix A.1.1. Error Message Displays when Downloading the PROFIBUS Database • Ensure that the correct serial port has been selected in the configure path setting. • Ensure that the FS-B35 is powered up with a valid configuration file declaring all the Slaves with which to communicate.
Need help?
Do you have a question about the FieldServer FS-8700-122 PROFIBUS DP Master and is the answer not in the manual?
Questions and answers