Table of Contents
Advertisement
38
Display Fahrenheit or Celsius
With the system in the "OFF" position, press both the MODE and THERMOSTAT buttons
simultaneously to toggle between Fahrenheit (F) and Celsius (C).
Low Battery Indicator
Transmitter Batteries
The transmitter has a battery-level indicator. When it indicates low battery voltage (see Figure 16 below),
install three new AAA alkaline batteries into the transmitter (see "Transmitter Battery Installation" on page
38).
IFC Batteries
The IFC (Integrated Fireplace Control) will "beep" repeatedly when the batteries get low. Install four new
AA alkaline batteries into the battery box when this occurs (see "Battery Installation" on page 38). In
applications where the appliance is required to provide heat, we recommend replacing the batteries
before each heating season.
Battery Replacement
Battery Installation
Install four AA batteries into the battery holder (see
Figure 17 below). These batteries act as a power
backup in case the household (AC) current goes out.
Transmitter Battery Installation
Install the three included AAA batteries into the
remote.
Power Outages
The remote will work if the household current (AC power) is disconnected. The batteries inside the battery
box will continue to power the heater but the accent light and blower will not operate.
© Travis Industries
Operation
Figure 15
Low Battery Indicator
F
OFF
MAX
Figure 16
Figure 17
9/17/2020 - 1536
F
F
C
DVL EG GSR2
Hide quick links:
Advertisement
Table of Contents
