Table of Contents
Advertisement
Glass Frame Removal and Installation
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for
this appliance.
The appliance must be completely cool before removing the glass.
Do not strike or slam the glass.
a
Open the latches holding the glass frame in place (start
with the bottom) - follow the directions shown to the right.
Glass Frame
Lift the glass frame up
b
and pull it forward to
remove. NOTE:
You may need to lift the
glass frame while re-attaching
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b)While holding in place, attach the upper latches
(follow the instructions to the right, in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should
be parallel with the front of the fireplace when installed.
© Travis Industries
Finalizing the Installation
NOTE:
Replace the cove
covers for those faces
using them.
9/17/2020 - 1536
Pliers may be used
Top of
Firebox
25
Latch
DVL EG GSR2
Hide quick links:
Advertisement
Table of Contents
