Mode Controls (Flame, Blower, Light, Comfort Control) - Travis Industries DVL EmberGlo GSR2 Insert Owner's Manual

36

Mode Controls (Flame, Blower, Light, Comfort Control)

Use the mode button to cycle through the four mode controls (see Figure 10 below).
Look here for
mode controls.
Flame Height
Flame height may be controlled using the UP and DOWN buttons when in Flame Height Mode (see
Figure 11 below). The center display will display the 7 settings, from "OFF" to "HI" for full-on.
NOTE: Flame height may not be adjusted if operating in Smart Thermostat setting.
When in flame height
mode, this icon will
appear darkened.
Blower Speed
The blower may be controlled using the up and down buttons when in Blower Speed Mode (see Figure
12). The center display will display the 7 settings, from "OFF" to "HI" for full-on.
When in blower
mode, this icon will
appear darkened.
MANUAL MODE – BLOWER OPERATION
When in Manual Mode the blower will remain on, even if the burner is turned off and the heater cools.
Either manually turn the blower off, or turn off the heater by pressing the On/Off button.
© Travis Industries
Press the mode button to cycle through the mode settings.
F
OFF
F
This is the flame height
OFF
read-out. Use the up or
down buttons to adjust
the flame height (7
settings).
MAX
F
This is the blower
OFF
speed read-out. Use
the up or down buttons
to adjust the blower
speed (7 settings).
MAX
Operation
Figure 10
Figure 11
Figure 12
9/17/2020 - 1536
Flame
Height
Optional
AUX
Blower
Accent Comfort
Light Control
High
Medium
Off
High
Medium
Off
DVL EG GSR2