Table of Contents
Advertisement
IP address setting function
IP addresses are delivered from the controller to servo amplifiers via CC-Link IE TSN.
Set the IP address required for CC-Link IE TSN communication from the following items. The IP address range is between
0.0.0.1 and 223.255.255.254. Set the IP address within the range.
[Pr. NPA01 IP address setting]
"00000000h" (The rotary switch is
used.)
"00000001h" (Network parameters are
used.)
The initial value of the IP address is as follows.
Item
IP address
Subnet mask
Rotary switches (SW1/SW2)
00h
01h to FEh
FFh
IP address
1st octet
Use the value of/for [Pr. NPA02 IP address].
2nd octet
3rd octet
4th octet
1st octet
Use the 1st to 3rd octet values of [Pr. NPA02 IP address].
2nd octet
3rd octet
4th octet
The setting value of the rotary switch (SW1/SW2) is used.
Not available.
1st octet
Use the value of/for [Pr. NPA02 IP address].
2nd octet
3rd octet
4th octet
Initial value
192.168.3.1
255.255.255.0
1 CC-Link IE TSN
13
1.3 Application function
1
Advertisement
Table of Contents
