NOTE:
1. In accordance with National Electrical Codes (NEC), please install a suitable
conduit and bushing for cable protection.
2. Please refer to national and local electrical codes for acceptable non-fuse
breakers and cable size.
3. Use 194°F (90°C) copper wires.
4. The tightening torque for an M10 screw should be 217 ± 8.7 lbf-in (250 ± 10
kgf-cm).
5. *
1
The suggested manufacturer is K.S. TERMINALS INC. You may use
equivalent terminals provided by other manufacturers.
Modulon DPH Series
17