CYP OR-44VWC Operation Manual page 14

Command Active
BEV??? Vertical (V) Bezel correction???=000 ~
Maximum
BEV998 Check the current Vertical(V) Bezel
correction Maximum value
BEV999 Check the current Vertical(V) Bezel
correction setting value
BRI??? Setting Brightness
???=000~100 for matrix mode
???=(000~100)+200*(OUT No.-1) for dual/tv wall mode
For example: OUT B set the Brightness value to 57
=(57)+200*(2-1) = 257
BRI99? Check current Brightness value
99?=999 for matrix mode
99?=991~994=OUT1~4 for dual/tv wall mode
CAL??? RECALL FAV. ???=001~004=FAV.1~4
CON??? Setting Contrast
CON999 Command setting same as
Brightness(BRI)
EGW999 RS232 only, check current Ethernet
Gateway Address
EIP999 RS232 only, check current Ethernet IP
Address
EMK999 RS232 only, check current Ethernet
Subnet Mask Address
HUE??? Setting HUE
HUE999 Command setting same as Brightness
(BRI)
INP??? INPUT selection???=001~004=IN 1~4
14
OR-44VWC
Return
BEV???
BEV???
BEV???
No response
BRI???
CAL???
No response
CON???
aaa.bbb.ccc.ddd
aaa.bbb.ccc.ddd
aaa.bbb.ccc.ddd
No response
HUE???
INP???