Getting Started - CareFusion Alaris Directions For Use Manual

Getting Started

Initial Set-up
Before operating the Alaris Enteral Syringe Pump read this Directions For Use manual carefully.
w
1. Check that the Alaris Enteral Syringe Pump is complete, undamaged and that the voltage rating specified on the label is compatible
with your AC power supply.
2. Items supplied are:
• Alaris Enteral Syringe Pump
• User Support CD (Directions For Use)
• AC Power Cable (as requested)
• Protective Packaging
3. Connect the Alaris Enteral Syringe Pump to the AC power supply for at least 2½ hours to ensure that the internal battery is charged
(verify that the S is lit).
Language Selection
1. On initial start-up the Alaris Enteral Syringe Pump will display the Select Language screen.
2. Select the required language from the list displayed using the
3. Press the OK softkey to confirm your selection.
The Alaris Enteral Syringe Pump will automatically operate from its internal battery if the Alaris Enteral Syringe
w
Pump is switched on without being connected to the AC power supply.
Should an Alaris Enteral Syringe Pump fail comissioning, replace in its original protective packaging, where possible
w
and contact a qualified service engineer for investigation.
f
1000DF00601 Issue 7
Alaris™ Enteral Syringe Pump
keys.
9/34
Getting Started