Seagull Models Radial Rocket JD 10cc Assembly Manual page 17

Blind nut.
5) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M3x15mm hex head bolts to se-
cure the motor. Please see picture shown.
M3x12mm
145 mm
WWW.SEAGULLMODELS.COM
4 mm
.
.
Epoxy
Balsa stick.
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
Speed control
Epoxy
17 17