Safety Requirements - quadient IS-240 Installation Manual

1.1

Safety Requirements

Power Connection
Before connection, check whether the Mailing System is suitable for external power supply;
refer to the type plates at the back of the pieces of equipment.
• Use an outlet located near the equipment and easily accessible. As the power supply
cord is the equipment disconnecting device, do not route the power cord between
pieces of furniture or over sharp edges.
• Avoid using outlets controlled by wall switches or shared by other equipment.
• Make sure there is no strain on the power supply cord.
Compliance
Energy Star compliance
Your mailing machine is Energy Star compliant: it helps you to save energy and money
while protecting the environment.
Environmental compliance
CE compliance
• To reduce the risk of fire, use only the power cord supplied
with the Mailing System.
• Do not use this product on a wet floor or near water.
• Your machine should be connected with a 19vdc - 2.6A limited
power source.
• In case of liquid spillage, disconnect the external power supply
from the wall plug and proceed to cleaning.
3