quadient IS-240 Installation Manual page 21

Setting up connection with an Analog Modem
a) Connecting with an Analog Modem
Select a location for the Mailing System near an analogue telephone jack.
The following are usually analogue phone lines: fax lines, lines used by modems or credit
card readers, residential phone lines.
Remove the analogue modem, cable and adaptor from the packaging.
Connecting your Mailing System to network with the analog modem
• Plug the modem USB connector into
the USB port located on the right hand
side of the Mailing System.
Connecting your Mailing System to the Power Supply
20