Loading Paper In The Manual Feed Tray - Canon PRO-300 Series Online Manual

Loading Paper in the Manual Feed Tray

You can load one sheet of 8" x 10" (20 x 25 cm) size paper or larger in the manual feed tray at a time.
Note
• We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine
paper, see Supported Media
• Print in an environment (temperature and humidity) suitable to the paper in use. For the temperature
and humidity conditions of Canon genuine papers, refer to the paper's packaging or the supplied
instructions.
• The manual feed tray does not accept plain paper. When printing on plain paper, load it in the top feed.
1. Prepare paper.
If paper is curled, flatten it.
Note
• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the
paper becomes completely flat.
For details on how to flatten curled paper, see
Scratched.
• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a
time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.
2. Open the manual feed tray (A), then extend the paper support (B).
3. Open the paper output tray (C) gently.
Important
• If the multi-purpose tray guide (D) is open, be sure to close it.
4. Open the output tray extension (E), then pull out the paper output support (F).
Types.
127
in Paper Is Smudged / Printed Surface Is
Check3