Canon PRO-300 Series Online Manual page 52

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
◦ Advanced
For details on each setting item:
Advanced
• Wireless Direct
The following setting information on the Wireless Direct connection is displayed. (Some items are not
displayed depending on printer settings.)
Items
Connection
Network (SSID)/device name
Password
Communication mode
Channel
Wi-Fi security
No. of printers connected now
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv6 link-local address
IPv6 link-local prefix length
MAC address (Wi-Fi)
IPsec settings
Printer name
Bonjour service name
("XX" represents alphanumeric characters.)
To change the setting, select Settings.
◦ Enable/disable Wireless Direct
Select Yes to wirelessly connect without wireless router.
◦ Change SSID/device name
Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for
Wireless Direct.
Setting
Enable / Disable
DIRECT-XXXX-PRO-300series
XXXXXXXXXX (10 characters)
Wireless Direct
3
WPA2-PSK (AES)
XX / XX
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XXX (up to 3 digits)
XX:XX:XX:XX:XX:XX (12 characters)
Enable (ESP) / Enable (ESP & AH) / Enable (AH) / Dis-
able
XXXXXXXXXXXXXXX (up to 15 characters)
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
52