Canon PRO-300 Series Online Manual page 55

Important
• If the LAN is disabled, the following items can not be selected.
◦ Set printer name
Specifies the printer name. You can use 2 to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
◦ TCP/IP settings
Performs IPv4 or IPv6 setting.
◦ WSD settings
Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, and Windows 7).
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 10, Windows 8.1, and Windows 7.
Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
Timeout settings
Specifies the timeout length.
◦ Bonjour settings
Setting items when you use Bonjour.
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ IEEE802.1X settings
Sets the IEEE802.1X authentication method, etc.
◦ LPR protocol settings
Enables/Disables the LPR setting.
◦ RAW protocol
55