Print Head Holder Does Not Move To Replacement Position - Canon PRO-300 Series Online Manual

Hide thumbs Also See for PRO-300 Series:

Table of Contents

Print Head Holder Does Not Move to Replacement Position

Is ON lamp off?

Check if the ON lamp is lit.

The print head holder will not move unless the power is on. If the ON lamp is off, close the top cover and turn the

The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit, open

the top cover again, then press the Stop button.

Is an error message displayed on LCD?

Close the top cover, follow the support code (error number) displayed in the error message to resolve the error,

and then reopen it. For details on resolving the error, see

Has top cover been left open for 10 minutes or longer?

If the top cover is left open for more than 10 minutes, the print head holder moves to the position to protect it to

prevent the print head from drying out. Close and reopen the top cover, then press the Stop button to return the

print head holder to the position for replacing.

Has printer been printing continuously for a long period?

Close the top cover, reopen it after a while, then press the Stop button.

If the printer has been printing continuously for a long time, the print head holder may not move to the position

for replacing since the print head may overheat.

List of Support Code for