Canon PRO-300 Series Online Manual page 70

Hide thumbs Also See for PRO-300 Series:
Table of Contents

Advertisement

6. When the Manage passwords screen is displayed, use the
administrator password and press the OK button.
If you do not specify an administrator password, select Remove administrator password and OK
button. Select Yes and press the OK button. When the message appears again, press the OK button.
7. Use the
buttons to select range where administrator password is valid and press the
OK button.
Remote UI and other tools
Entering the administrator password is required to change the setting items using the Remote UI or
IJ Network Device Setup Utility.
LCD, Remote UI, and other tools
Entering the administrator password is required to change the setting items using the operation
panel of the printer, the Remote UI, or IJ Network Device Setup Utility.
8. Enter administrator password.
Pressing the OK button displays the input screen.
Use the
administrator password.
Important
• The following character restrictions apply to the password:
• Set the password by using 4 to 32 characters.
• The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below symbols.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) [ ] { } < > |
• For security reasons, we recommend you use 8 and more alphanumeric characters.
9. Use the
buttons to select Apply and press OK button.
10. Enter administrator password you specified again.
Pressing the OK button displays the input screen.
After you finished entering the administrator password on the password input screen, use the
buttons to select Apply and press the OK button.
The administrator password is enabled.
When You Want to Disable the Administrator Password:
After operating in the following order on the printer's operation panel, follow the on-screen instructions to
remove the administrator password.
Various settings > Printer settings > Administrator password settings > Enter the administrator
password > Remove administrator password
buttons to select OK and press the OK button when you finished entering the
70
buttons to select Change

Advertisement

Table of Contents
loading

Table of Contents