Pictbridge (Wi-Fi) Print Settings - Canon PRO-300 Series Online Manual

PictBridge (Wi-Fi) Print Settings

Settings on PictBridge (Wi-Fi) Compliant Device
Settings on Printer
Settings on PictBridge (Wi-Fi) Compliant Device
This section describes the PictBridge (Wi-Fi) function of the printer. For the print settings on a PictBridge
(Wi-Fi) compliant device, refer to the instructions given in the device's instruction manual.
Note
• In the following description, names of setting items are given according to those used in Canon-brand
PictBridge (Wi-Fi) compliant devices. Setting item names may be different depending on the brand or
model of your device.
• Some setting items explained below may not be available on some devices. In this case, the settings
made on the printer are applied. Also, when some items are set to Default on a PictBridge (Wi-Fi)
compliant device, the printer settings for these items are applied.
PictBridge print settings
The following settings can be used when printing from a PictBridge (Wi-Fi) compliant device.
• Paper size
◦ A3+
◦ A3
◦ Letter
◦ A4
◦ 4" x 6" (10 x 15 cm)
◦ 5" x 7" (13 x 18 cm)
◦ 8" x 10" (20 x 25 cm)
◦ 2L (5.00 x 7.01 in. (127.0 x 178.0 mm))
◦ Square 5" x 5" (13 x 13 cm)
Note
• Depending on your PictBridge (Wi-Fi) compliant device, you may not be able to select some
paper sizes or paper size names may vary.
• Paper type
◦ Default:
Photo Paper Pro Platinum <PT-101>
◦ Photo:
Photo Paper Plus Glossy II <PP-201/PP-301>
Photo Paper Plus Semi-gloss <SG-201>
Matte Photo Paper <MP-101>
◦ Fast Photo:
434