Table of Contents
Advertisement
Click OK when the confirmation message appears.
When a message prompting you to change the media type appears, select a media type from the list
and click OK.
3. Check the paper size
Check the Page Size list. When you want to change it, select another page size from the list. The list
displays only sizes that can be used for borderless printing.
4. Adjust the amount of extension from the paper
If necessary, adjust the amount of extension using the Amount of Extension slider.
Moving the slider to the right increases the amount extending off the paper, and moving the slider to
the left decreases the amount.
It is recommended to set the slider at the second position from the right for most cases.
Important
• When the Amount of Extension slider is set to the rightmost position, the back side of the
paper may become smudged.
5. Click OK
When you perform print, the data is printed without any margins on the paper.
Important
• When a page size that cannot be used for borderless printing is selected, the size is automatically
changed to the valid page sizes for borderless printing.
• When Borderless is selected, the Printer Paper Size, Duplex Printing (Manual), Stapling Side
settings, and the Stamp/Background... button on the Page Setup tab appear grayed out and are
unavailable.
• When Plain Paper or Hagaki A is selected from the Media Type list on the Main tab, you cannot
perform borderless printing.
• Depending on the type of paper, Borderless Printing may reduce the print quality at the top and
bottom edges of the paper.
Borderless Printing on thick paper may also smudge the front or back surface of the paper.
• When the ratio of the height to the width differs from the image data, a portion of the image may not
be printed depending on the size of the media used.
In this case, crop the image data with an application software according to the paper size.
Expanding the Range of the Document to Print
Setting a large amount of extension allows you to perform borderless printing with no problems. However,
the portion of the document extending off the paper range will not be printed and for this reason, the
subjects around the perimeter of a photo may not be printed.
341
Advertisement
Table of Contents
