Canon PRO-300 Series Online Manual page 189

Hide thumbs Also See for PRO-300 Series:

Table of Contents

Select Wi-Fi and click OK.

6. Enter password and click OK.

The Network Settings screen appears.

7. Perform/change settings.

You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol.

• IPv4/IPv6 settings

A: Network Type:

Select the Wi-Fi mode.

◦ Infrastructure

Connects the printer to the Wi-Fi with a wireless router.

Connects the printer to wireless communication devices (smartphone or tablet) without a

wireless router.

• If Wi-Fi is enabled on the computer and if you select a USB connected printer on step

4, you can select Direct depending on the printer you are using.

• If Direct is selected, all items are displayed in a gray out status and you cannot

perform any settings.

In addition, you cannot connect to Internet from your computer depending on your

operating environment.

B: Network Name (SSID):

The network name (SSID) of the Wi-Fi currently used is displayed.