Fall Hazard - JLG 3513PS Operation & Safety Manual

Section 1 - General Safety Practices

Fall Hazard

• During operation, occupants in the platform must wear a full body harness with a
lanyard attached to an authorized lanyard anchorage point.
• Before operating the machine, make sure all gates are closed and fastened in their
proper position.
• Keep both feet firmly positioned on the platform floor at all times. Never use ladders,
boxes, steps, planks or similar items on platform to provide additional reach.
• Never use the boom assembly to enter or leave the platform.
• Use extreme caution when entering or leaving platform. Be sure that the boom is fully
lowered. Face the machine, maintain three point contact with the machine, using two
hands and one foot or two feet and one hand during entry and exit.
• Avoid accumulation of debris on platform floor. Keep mud, oil, grease and other
slippery substances from footwear and platform deck.
1-8
OZ1290
OZ1300
31200345