Frequency/Voltage Control - Elitegroup Computer Systems K7S5A2 Manual

K7S5A2 V1.0

Frequency/Voltage Control

This item enables you to set the clock speed and system bus
for your system. The clock speed and system bus are deter-
mined by the kind of processor you have installed in your
system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum Modulated
CPU Host/PCI Clock
CPU Vcore Voltage
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal
of free DIMM and PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the
EMI (Electro-Magnetic Interference) generated by the system.
CPU Host Clock (CPU/PCI) (Default)
Use the CPU Host Clock to set the frontside bus frequency for
the installed processor or processors (usually 133 MHz, 100
MHz or 66 MHz).
CPU Vcore Voltage (Default)
Use this item to set the CPU Vcore without using the CPU in-
ternal value.
Note: Modifying the CPU Vcore Voltage may cause the
system to become unstable. Use caution and proceed
at your own risk.
Frequency/Voltage Control
[Enabled ]
[Enabled]
[Default]
[Default]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
60
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults