K7S5A2 V1.0
This option defines if the video is powered down when the
system is put into suspend mode.
Video Off Method (DPMS Support)
This item defines how the video is powered down to save
power. This item is set to DPMS (Display Power Management
Software) by default.
Switch Function (Break/Wake)
This option enables you to specify the function of the power
button:
•
Disabled: The power button functions as a normal power
button.
•
Break/Wake: The power button functions as a suspend
button. When the button is depressed, the system enters
a suspended state until the button is again depressed to
return the system to normal operating status.
MODEM Use IRQ (3)
If you want an incoming call on a modem to automatically re-
sume the system from a power-saving mode, use this item to
specify the interrupt request line (IRQ) that is used by the mo-
dem. You might have to connect the fax/modem to the
mainboard Wake On Modem connector for this feature to work.
Hot Key Function As (Power Off)
This option allows you to set the Hot Key functionality to one
of the following states: Disable (turn off Hot Key functionality),
Power Off, Suspend.
HDD Off After (Disable)
The IDE hard drive will spin down if it is not accessed within a
specified length of time. Options are from 1 Min to 15 Min and
Disable.
Power Button Override (Instant-Off)
Under ACPI (Advanced Configuration and Power manage-
ment Interface) you can create a software power down. In a
software power down, the system can be resumed by Wake
Up Alarms. This item lets you install a software power down
that is controlled by the normal power button on your system.
If the item is set to Instant-Off, then the power button causes a
54
Need help?
Do you have a question about the K7S5A2 and is the answer not in the manual?
Questions and answers