Set Password Option - Elitegroup Computer Systems K7S5A2 Manual

K7S5A2 V1.0

Set Password Option

This item can be used to install a password. To install a pass-
word, follow these steps:
1. Highlight the item Set Password on the main menu
and press <Enter>.
2. The password dialog box appears.
Enter Password:
3. If you are installing a new password, type in the pass-
word. You cannot use more than eight characters or
numbers. The Set Password item differentiates be-
tween upper case and lower characters. Press
<Enter> after you have typed in the password. If you
are deleting a password that is already installed just
press <Enter> when the password dialog box appears.
You see a message that indicates that the password
has been disabled.
PASSWORD DISABLED !!!
Press any key to continue . . .
4. Press any key. You are prompted to confirm the pass-
word:
Confirm Password:
5. Type the password again and press <Enter>, or just
press <Enter> if you are deleting a password that is al-
ready installed.
6. If you typed the password correctly, the password will
be installed.
62