Frequency/Voltage Control - Elitegroup Computer Systems K7S5A+ Manual

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
Phoenix – AwardBIOS CMOS Setup Utility
Auto Detect DIMM/PCI Clk
Spread Spectrum Modulated
CPU Host/PCI Clock
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and
PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
CPU Host Clock (CPU/PCI) (Default)
Use the CPU Host Clock to set the frontside bus frequency for the installed
processor or processors (usually 133 MHz, 100 MHz or 66 MHz).
Frequency/Voltage Control
[Enabled]
[Enabled]
[Default]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
44
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults