Frequency/Voltage Control - Elitegroup Computer Systems P6VXM2T Manual

Frequency/Voltage Control

This item enables you to set the clock speed and system bus
for your system. The clock speed and system bus are deter-
mined by the kind of processor you have installed in your
system.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/PCI Clock
↑ ↓ → ← : Move Enter : Select
F5:Pr evious Values
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal
of free DIMM and PCI slots.
Spread Spectrum Modulated (Disabled)
If you enable spread spectrum, it can significantly reduce the
EMI (Electro-Magnetic Interference) generated by the system.
CPU Host/SDRAM/PCI Clock (Default)
These items appear if you have set the CPU Internal Core
Speed to Manual. Use the CPU/DIMM/PCI Clock to set the
frontside bus frequency for the installed processor (usually
133 MHz, 100 MHz or 66 MHz). Then use CPU Clock Ratio to
set a multiple.
Frequency Control
Enabled
Disabled
Default
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
63
Item Help
Menu Level
F1:General Help