Transmitter Calibration; Transmitter Control Stick Settings; Flight; Download The X-Hubsan 2.0 App - Hubsan Zino 2+ User Manual

2.6 Transmitter Calibration

(1)Pull the both joysticks to the upper left corner, and simultaneously press and
hold the power button to turn on the transmitter, release the power button and
joysticks after hearing the transmitter make some beep sounds and the LED indica-
tor light continues to flash in cycle.
(2)Rotate the both joysticks to the maximum angle clockwise for at least 3 times,
then release the joystick.
(3)Long press any button(except the power button) on the transmitter, when the
transmitter beeps 3 times and the LED indicator light become solide, the transmit-
ter calibration is complete.
(4)Shut down and restart the transmitter.

2.7 Transmitter Control stick settings

Open APP- Settings- Control- Control stick setting, can switch the
control stick mode (Mode 1/Mode 2)

3 Flight

3.1 Download The X-hubsan 2.0 App

Before flying, users must download the X-Hub-
san 2.0 APP.
Download the APP for free by scanning the code
as shown or by download it via APP Store (IOS)
Or Goggle Play.
c o n t ro l s t i c k m o d e
U p
C o n t ro l
Turn Left
C o n t ro l s t i c k s e t t i n g
F o r w a rd
Right
Left
Turn Left
Turn Right
10
M o d e 1
F o r w a rd
Turn Right
X-Hubsan 2.0