Remote Controller Features - Hubsan Zino 2+ User Manual

2.2 Remote Controller Features

S/N Key / Switch
Throttle / Rudder
(1)
Stick
Elevator / Aileron
(2)
Stick
Throttle / Aileron
1
Stick
Elevator / Rudder
2
Stick
Return to Home
3
Power Switch
4
F / N / S mode
(Movie / Normal /
5
Sport mode)
Display
6
Photo
7
Video
8
Gimbal Adjustment
9
Wheel
Push the stick forward or backward and the quad-
copter will ascend or descend (respectively). Push the
stick left or right and the quadcopter will fly left or
right (respectively).
Push the stick forward or backward and the quad
copter will fly forwards or backwards (respectively).
Push the stick left or right and the quadcopter will
rotate counterclockwise or clockwise (respectively).
Push the stick forward or backward and the quad-
copter will ascend or descend (respectively). Push the
stick left or right and the quadcopter will rotate
counterclockwise or clockwise (respectively).
Push the stick forward or backward and the quad-
copter will fly forwards or backwards (respectively).
Push the stick left or right and the quadcopter will
fly left or right (respectively).
Long press to enter home mode, short press to exit
and return to home;
During the flight, the remote control "Beep... Beep..."
prompt (once every three seconds)
Press first a short press and then a long press to
power on or off
Movie mode: Flying speed of the aircraft 1m / s
Normal mode: the aircraft flies at the maximum
speed set by the APP,12m / s
Sport mode: the maximum flying speed of the
aircraft is 20m / s
Display flight parameters
Short press to take photos.
Long press to start recording,
short press to end recording
Controls the angle of the gimbal.
7
Function