Page 1
® ® Connected E : 0 % R : 0 % T : 0 % A : 0 % 4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 S P E E D 0 .
Page 2
Before connecting to the device, Android devices need to be swiched to USB debugging mode. Take Huawei's phone as an example: Step 1: Go to the Settings on your device and go into System...
Page 3
Step 2: Go to "About Phone" and click on "Version Number" then you will see the device is already in Developer Mode.
Page 4
Step 3: Go back to "System" and go to "Developer Options"...
Page 7
Step5: (1)Long press the power button on the transmitter, run the X-Hubsan APP and use the adapter cable to connect the HT016B transmitter to the mobile device. For USB connection Mode, use the default "Charging Only" option. (2)Confirm to use the USB in X-Hubsan.
Page 8
After connecting the devices successfully, the control icon in the APP will change. Not connected E: 0 % R : 0 % T : 0 % A : 0 % Before N 0 0 . 0 0 0 0 0 0 0 , E 0 0 0 . 0 0 0 0 0 0 0 S p e e d 0 .
Page 9
Precautions: a. Be sure to turn on the "USB Debugging" mode on the mobile device. Each device may have slight difference in opening the debugging mode. b. "Charge Only" option is preferred. If you cannot connect the devices after multiple attempts, you may try "Media Devices (MTP)"...
Page 10
Please consult Hubsan Customer Service Team for analysis. (3) Run the X-Hubsan APP. In the "Settings" on the upper right corner, click "Control". Select "WIFI" for the transmitter connecting method. Enter "Set up the transmitter with the aircraft"...