Intelligent Flight Battery Function - Hubsan Zino 2+ User Manual

1.2.3 Intelligent Flight Battery Function

(1) Power display: The battery has a power indicator, which can display the current
battery power.
(2) Battery storage self-discharge protection: After the battery is fully charged and
stored for 10 days without any operation, the battery will automatically turn on the
self-discharge mode to protect the battery (there may be slight heating during
discharge).
(3) Balance protection: automatically balance the battery cell voltage to protect the
battery.
(4) Charging temperature protection: When the battery temperature is below 5 °
Cor above 40 ° C, battery will be damaged. So battery will not start charging at this
temperature,
(5) Charging over-current protection: High-current charging will seriously damage
battery. When charging current is too large, the battery will stop charging.
(6) Overcharge protection: Overcharging will seriously damage the battery. When
the battery is fully charged, it will automatically stop charging.
(7) Over-discharge protection: Excessive discharge will seriously damage the
battery. When the battery is not in use. Battery will cut off the output when it is
discharged to a certain voltage. While over-discharge protection won't start during
the flight.
(8) Short circuit protection: When the battery detects a short circuit, it will cut off
the output to protect the battery.
(9) Cell damage detection: When the battery detects that the battery is damaged or
the battery is seriously unbalanced, it will indicate that the battery is damaged.
(10) Hibernation protection: When the battery is on, the battery will turn off the
output after 20 minutes and will enter into no-working state to maintain the power
if no electrical equipment is connected. When the battery power is less than 5%, if
the machine is locked but not turned off, it will automatically shut down. If the
machine is turned off, the battery will automatically enter the sleep state to prevent
over-discharge. At this time, short press the battery switch, the power indicator will
not light up, the battery can be waken up by charging again.
(11) Communication: The aircraft can obtain battery information in real time
through the communication interface on the battery such as voltage and power.
Battery switch
Short press to check the battery level, it will turn off
after 3 seconds
S h o r t p r e s s f i r s t a n d t h e n l o n g p r e s s t o t u r n
on / off, the indicator light turns on / off
4